Project instructions
Mantaray
Watch as this manta ray glides elegantly through the air thanks to a modular 5 cam setup. We're including step files for the drive system so that you can make your own automata using this platform!
Printed Parts:
Printed parts: download from Printables
Total filament needed: Roughly 435 grams
all parts can be printed at .2mm layer heights without issue.
The only part that needs supports is the spindle, which needs supports on both ends. The rest should print just fine without support, including the manta ray itself.
Assembly Manual:
Download the full assembly manual PDF here: Manual (15.4mb)
Materials included
- tt motor
- usbc power board
- usbc cable
- 2x bearings
- 15x m3x8 screws
Assembly Video:
Accessory
See how many volts and amps your usb device is pulling with this handy little usb tester!
Snack
Enjoy some flavored honey from The Honey Pot! Your box should come with 2 honey sticks. One is Lemon, the other is just honey harvested from wild flowers.
Filament
|
 |
 |
 |
This month's filament is all translucent. It works perfectly with this month's project!
- Esun PLA Luminous: https://esun3dstore.com/products/epla-luminous
- Esun PLA+ Magenta: https://esun3dstore.com/products/pla-refilament?VariantsId=13127
- Esun PLA+ Very Peri: https://esun3dstore.com/products/pla-refilament?VariantsId=13132
- Esun PLA Silk Copper: https://esun3dstore.com/products/epla-silk-metal?VariantsId=12071