Project instructions
Magic 8 Ball V2
Ask a question and snatch the magic 8 ball off a table to get your answer. This updated take on the old classic, designed by Charlie Bess, is a refreshing high tech toy with a retro vibe.
Not only does it have a cool digital screen, you can log in and load custom messages so that your magic 8 ball can have whatever outlook you want!
Printing Tips
Printed parts: download from Printables
For best results, we recommend printing the halves of the 8ball as domes (as opposed to bowls). We used variable layer height in the slider, but just choosing a finer detail will improve the curve at the top of the dome and the threads. You will need to enable supports.
CookieCAD Magenta Elixir
CookieCAD Witches Blue
Kit Contents
What’s in My Box?
- Battery holder
- tilt switch
- esp32
- round display
- 2x wago connectors
- wires
- m2 screws for display
- m3 screws
Assembly
Written Guide
Download the full assembly manual PDF here: Download (20 MB)
Video Guide
Software Setup
Code
First, try our web loader! It only works in chrome and chrome based browsers, but it is the easiest way to get the code onto your device. If our loader isn't working for you, we recommend trying the one at web.esphome.io. just download this bin file to run there.
if you're savvy and want to dig in, here is the raw arduino code.
The password for the wifi interface is: magic8ball
Subscriber Benefits
--------------- member benefits below this point ----------------
Accessory
Just a simple fresnel magnifying card that can fit in your wallet or pocket. You'll be surprised how often you find yourself pulling it out to look at things though, just be careful in the sun, this thing can pack a real punch and burn something.
Snack
An all time classic, in kit form.
Filament